product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 1 4.75" 7" ? high effciency (92% for 48 vout model at 1400w) ? universal input voltage range ? semi-regulated output for bus stability ? integral fan cooling with speed control ? active pfc; en61000-3-2 compliant ? low noise; en55011 / en55022 class b compliant ? overCcurrent, overCvoltage, & overCtemp protection ? dc power good / ac power good signals ? fan status output / remote enable input ? small size: 4.75" x 7" x 1.625" (encased) ? rohs 6/6 compliant ? 5 v (500 mw) standby output product features technical specifcation acuqor single output industrial grade ac/dc power supply with pfc 85-264vrms 12/15/24/28/48v 1400w 1800w 92% input voltage semi-regulated output output continuous output transient full load efficiency
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 2 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial general specifications fundamental ripple freq. input output 500 khz 250 khz audible noise fan speed varies with temp. 45 dba @ 1 m max. weight ( aq0800xxxxgc ) ( aq1100xxxxgc ) ( aq1400xxxxgc ) 998 g (35.2 oz) 1179 g (41.6 oz) 1179 g (41.6 oz) mtbf mil-217 demonstrated 533 khours tbd khours isolation specifications isolation voltage input to output input to ground output to ground 3000 vrms 1500 vrms 500 vrms insulation resistance output to ground 10 m min. leakage currents see note 2 environmental characteristics thermal performance operating ambient (see fig 11) non-operating ambient -40 oc to +70 oc -40 oc to +85 oc relative humidity non-condensing 5-95% rh altitude operating non-operating 10,000 ft max. 30,000 ft max. random vibration 5-500 hz 0.03 g2/hz shock half-sine, 10 ms, 3 axes 20 g peak emc characteristics conducted emissions en55011 and en55022, fcc part15 level b line frequency harmonics en61000-3-2 class a voltage fuctuations en61000-3-3 clause 5b esd air en61000-4-2 level 3 esd contact en61000-4-2 level 3 radiated immunity en61000-4-3 level 3 fast transients en61000-4-4 level 3 line surge immunity en61000-4-5 level 3 conducted immunity en61000-4-6 level 3 power freq. mag. feld en61000-4-8 3 a/m voltage dip immunity en61000-4-11 perf criteria b, a, b <5% ut 10 ms, 70% ut 500 ms, 40% ut 100 ms notes: 1. derate 2 ma per c above 50 c ambient temperature. 2. leakage currents see page 4. acuqor 1400w series electrical characteristics all specifications typical with ta = 25 c, unless otherwise specified. specifications subject to change without notice. main output specifications output power (continuous) 85-132/170-264 vrms 1400w (5 s transient) 85-132/170-264 vrms 1800w 132-170 vrms see figure 12 nominal dc output voltage (at 800w) (semi-regulated) 12 vout 15 vout 24 vout 28 vout 48 vout 12.4 v 15.6 v 25 v 29 v 50 v effciency (see fgs. 1 - 10) 12 vout, 115 vrms, 1400w 87% typ. 24 vout, 115 vrms, 1400w 89% typ. 48 vout, 115 vrms, 1400w 90% typ. 12 vout, 230 vrms, 1400w 89.5% typ. 24 vout, 230 vrms, 1400w 90.5% typ. 48 vout, 230 vrms, 1400w 91.5% typ. hold-up time (to -20%) 12 / 15 vout 10 ms @ 1400w 24 / 28 / 48 vout 12 ms @ 1400w maximum load capacitance 12 vout 15 vout 24 vout 28 vout 48 vout 48,000 f 40,500 f 24,000 f 19,200 f 6,000 f output ripple voltage switching frequency (20 mhz bw) 0.5% p-p twice line frequency (at 800w) 5.0% p-p turn-on delay 2 s max. transient response iout steps from 50-75% at 0.2 a/s 3% typ / 6% max. dev. 100 ms recovery overvoltage protection cyclic restart 110-120% short circuit protection cyclic operation 115% rated iout total regulation over line, load and temperature 6.0% auxiliary output always on (see note 1) 5 v @ 100 ma thermal protection automatic recovery +125 oc (pcb temp) remote_enable input low voltage input high voltage 0.45 v (max) 4.15 v (min) input specifications ac input voltage universal range 85-264 vrms input frequency 47-63 hz input current 115 vrms @ 1400w 14 arms 230 vrms @ 1400w 7 arms power factor >0.98 input surge current 264 vrms (cold start) 50 a max. internal input fuses both ac lines 20 a safety agency certifications can/csa-c22.2 no. 60950-1:2007 ul 60950-1:2007 en 60950-1/a1:2010 ce marked
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 3 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial 65 70 75 80 85 90 95 100 0 300 600 900 1200 1500 1800 output power (w) efficiency (%) 115 vrms 230 vrms 65 70 75 80 85 90 95 100 0 300 600 900 1200 1500 1800 output power (w) efficiency (%) 115 vrms 230 vrms 65 70 75 80 85 90 95 100 0 300 600 900 1200 1500 1800 output power (w) efficiency (%) 115 vrms 230 vrms efficiency, derating, and v out droop curves figure 1: 12 vout effciency curves. figure 2: 12 vout droop characteristic. figure 3: 15 vout effciency curves. figure 4: 15 vout droop characteristic. figure 5: 24 vout effciency curves. figure 6: 24 vout droop characteristic.
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 4 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial 65 70 75 80 85 90 95 100 0 300 600 900 1200 1500 1800 output power (w) efficiency (%) 115 vrms 230 vrms 65 70 75 80 85 90 95 100 0 300 600 900 1200 1500 1800 output power (w) efficiency (%) 115 vrms 230 vrms ac leakage current from input to earth ac line connection normal condition open neutral fault acuqor typical at 110% nominal input voltage 60 hz 240 v l-n, 1 phase 400 a 800 a 208 v l-l, 120 v l-n, 1 of 3 phases 200 a 400 a 240 v l-n-l, 120 v l-n, split phase 200 a 400 a table 1: leakage currents figure 7: 28 vout effciency curves. figure 8: 28 vout droop characteristics. figure 9: 48 vout effciency curves. figure 10: 48 vout droop characteristics.
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 5 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial figure a: power good and fan good interface circuitry. figure b: remote enable interface circuitry. figure 11: continuous power derating curve in natural convection. figure 12: rated output power vs input ac voltage. 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 0 10 20 30 40 50 60 70 80 ambient / case temperature ( oc ) power (w) 85 132 190 264 105 110 140 170 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 input ac voltage (v rms ) power (w) transient continuous output data connector pinout pin 1 reserved reserved for future use. pin 2 reserved reserved for future use. pin 3 vout(C) negative output voltage pin 4 remote_enable logic input. see figure b. pull high to enable main output. pin 5 fan_good open collector with internal 5 v pullup. see figure a. pulsed low on fan failure, 100 ms, 50% duty. pin 6 ac_power_good open collector with internal 5 v pullup. see figure a. pulled low on ac power dropout. pin 7 dc_power_good open collector with internal 5 v pullup. see figure a. pulled low during startup ramp and within 5oc of temperature shutdown threshold. pin 8 5v_standby 5 v @ 100 ma available whenever ac power is applied. output power connector pinout pin 1 vout(+) positive output voltage pin 2 vout(C) negative output voltage pin 3 vout(+) positive output voltage pin 4 vout(C) negative output voltage pin 5 vout(+) positive output voltage pin 6 vout(C) negative output voltage pin 7 vout(+) positive output voltage pin 8 vout(C) negative output voltage input connector pinout pin 1 ground pin 2 ac neutral pin 3 ac line 1 3 mating connectors connector type contact output (power) positronic pla08m7 positronic ms112n output (data) molex 43025-0800 molex 43030-0008 input hirose df22b-3s-7.92c hirose df22a-1012sc
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 6 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial notes 1. recommended screw tightening torque of 6in.. lbs. 2. undimensioned components are shown for visual reference only 3. all dimensions in inches [mm] tolerances: x.xx in 0.02 x.xxx in 0.010 mechanical drawings 4.30 [ 109, 2 ] 2.28 [ 57, 8 ] 4.75 [ 120, 7] .7 5 [ 19, 1 ] 6.63 [ 168, 3] .1 6 [4,1 ] .2 5 [ 6, 4 ] .2 0 [ 5, 1 ] 4.25 [ 108 ] 6.60 [1 67,6 ] plast ic ri vet od . .1 9 4, 8 [ ] 7.00 [ 177, 8] 6- 32 sel f cl in chi ng in se rt mo unt in g s cre w sh all no t pr ot rude 3/8" in to th e ch assi s x4 1. 03 .0 4 [ 26, 1 1 ] .6 2 . 03 [ 15, 8 0 ,7 ] 1. 31 .0 3 [ 33, 3 0 ,7 ] ou tp ut po we r pi n 1 .5 1 . 03 [1 3 0 ,7 ] 3. 47 .0 3 [ 88, 2 0 ,7 ] ou tp ut da ta pi n 1 .8 9 . 03 [ 22, 5 0 ,7 ] in pu t pi n 1 front view bac k view 1.63 [ 41, 3 ] 4.84 [ 123 ]
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 7 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial model input fuses fuses total (in both ac lines) aq0800 cooper bussmann 20a 250v gbb-20 2 aq1100 cooper bussmann 20a 250v gbb-20 2 aq1400 cooper bussmann 20a 250v gbb-20 2 table 2: ac line fuse for specifc acuqor industrial models installation instructions general information: acuqor ac/dc power supplies are intended for use as components in medical and industrial equipment. acuqor units must be properly installed within end use equipment before they can be safely applied as described in this document. the suitability of the acuqor/equipment combination pvw eh yhulhg wur hqg surgfw lqyhvwldwlrq mounting: refer to the mechanical drawings section. acuqor units are provided with threaded stainless- steel stand-offs or inserts for mounting. this mounting hardware is internally connected to the input connector protective-earth terminal for functional-earth emc control. any orientation (vertical, horizontal, etc.) may be used. adequate air space should be provided over the fan intake (top) and exhaust (sides) to allow for exchange of cooling air. acuqor is designed for a pollution degree 2 environment. a minimum of 5 mm electrical clearance should be allowed from the connector ends of encased models. input: refer to the connector details section for input connector wiring. acuqor products require a single phase ac power source of 100-240v 50/60hz nominal. refer to nameplate label for input current ratings. a protective- earth connection is also required. minimum wire size of 14 awg (2.5mm 2 ) is recommended. both sides of the ac line duhlqwhuqdooivhgvhhwdeohiruvshflfprghov7hvh fuses are not user replaceable. output: refer to the connector details section for the output connector wiring and signal i/o functionality. refer to nameplate label for output current ratings. main dc output (vout+, vout-) pins should use 12 awg (4.0mm 2 ) wire size. individual main output pins should not be loaded to more than 30 a. for currents greater than 30 a, multiple main output pins/wires must be used in parallel. all signal i/o pins are referenced to vout-. emc: acuqor products have been tested to the emc vshflfdwlrqv olvwhg lq wh vhfwlrq ri wh gdwdvhhw wlwohg electrical characteristics, on page two. however, end use equipment must be tested to verify emc compliance. hipot testing: acuqor products are rated for hipot testing levels of 1500 vac input to protective-earth, 500 vac output to protective-earth, and 3000 vac input to output. when performing the 3000 vac input to output test, the test voltage must be balanced evenly 1500 vac input and output to protective-earth. two oppositely phased test voltage sources or a single test voltage source with external balancing impedances (capacitors) may be used to prevent overstressing input or output to protective-earth insulation per iec/en 60950-1. conductive cooling : this product requires supplemental conductive cooling through its case to maintain the rated output power. the case should be mounted to a system chassis or heat sink with a thermally conductive interface material and kept at 50c maximum to maintain full power rating of the product. for detailed applications assistance, consult applications engineering through the sales channel.
product # aq1400iuxx phone 1-888-567-9596 www.synqor.com doc.# 005-0005979 rev. e 10/01/15 page 8 ac input: 85-264vrms dc output: 12/15/24/28/48v power: 1400w grade: industrial accessories synqor offers a series of assemblies that can be ordered according to the table below. mechanical drawings for these accessories are available for download in pdf format from the synqor website. family output power grade range output voltage package type thermal design options aq: acuqor series of ac-dc semi-regulated output power supplies 0800: 800w 1100: 1100w 1400: 1400w m: (medical) i: (industrial) u: universal (85-264 vrms) 12: 12v 15: 15v 24: 24v 28: 28v 48: 48v g: 1 unit (5"x7") c: encased medical grade b: b isolation rating bf: bf isolation rating cf: cf isolation rating cfd: cf isolation rating defbrillator proof ind: industrial grade part number description AQ-CBL-INPUT1CG input mating cable with pre-stripped wire ends (36 long) aq-cbl-out1cdg output mating cables (signal and power) with pre-stripped wire ends (18 long) example: aq1400iu24gcind warranty synqor offers a two (2) year limited warranty. complete warranty information is listed on our website or is available upon request from synqor. contact synqor for further information and to order: phone: 978-849-0600 toll free: 888-567-9596 fax: 978-849-0602 e-mail: power @synqor.com web: http://www.synqor.com/ address: 155 swanson road boxborough, ma 01719 usa patents synqor holds numerous u.s. patents, one or more of which apply to most of its power converter products. any that apply to the product(s) listed in this document are identifed by markings on the product(s) or on internal components of the product(s) in accordance with u.s. patent laws. synqors patents include the following: 5,999,417 6,222,742 6,545,890 6,594,159 6,731,520 6,894,468 6,896,526 6,927,987 7,050,309 7,072,190 7,085,146 7,119,524 7,269,034 7,272,021 7,272,023 7,558,083 7,564,702 7,765,687 7,787,261 8,023,290 8,149,597 8,493,751 8,644,027 9,143,042 application notes a variety of application notes and technical white papers can be downloaded in pdf format from the synqor website. online application notes online library of technical white papers synqor website. part numbering system the part numbering system for synqors acuqor ac/dc power supplies follows the format shown in the table below. not all combinations make valid part numbers, please contact synqor for availability.
|
